• 欢迎访问少将全栈,学会感恩,乐于付出,珍惜缘份,成就彼此、推荐使用最新版火狐浏览器和Chrome浏览器访问本网站。
  • 吐槽,投稿,删稿,交个朋友,商务沟通v:ai_draw
  • 如果您觉得本站非常有看点,那么赶紧使用Ctrl+D 收藏少将全栈吧

CentOS上的redis搭建实战记录

点滴 admin 8年前 (2016-07-20) 1759次浏览 已收录 0个评论 扫描二维码

redis 是一个基于内存的高性能key-value数据库,数据都保存在内存中定期刷新到磁盘,以极高的读写效率而备受关注。他的特点是支持各种数据结构,stirng,hashes, list,set,和sorted sets

1、下载安装

wget http://download.redis.io/redis-stable.tar.gz

tar -zxvf redis-stable.tar.gz

cd redis-stable

make

make test 检查一下是否正常,遇到2个错误

[root@localhost redis-stable]# make test
cd src && make test
make[1]: Entering directory `/usr/local/src/redis-stable/src’
which: no tclsh8.5 in (/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/geffzhang/bin)
You need ’tclsh8.5’ in order to run the Redis test
make[1]: *** [test] 错误 1
make[1]: Leaving directory `/usr/local/src/redis-stable/src’
make: *** [test] 错误 2
[root@localhost redis-stable]#

没安装tcl

按照官网http://www.linuxfromscratch.org/blfs/view/cvs/general/tcl.html 上的安装

make install

mkdir -p /usr/local/bin
cp -pf redis-server /usr/local/bin
cp -pf redis-benchmark /usr/local/bin
cp -pf redis-cli /usr/local/bin
cp -pf redis-check-dump /usr/local/bin
cp -pf redis-check-aof /usr/local/bin
make[1]: Leaving directory `/usr/local/src/redis-stable/src’
[root@localhost redis-stable]#

好了,现在redis就安装成功了

Redis 由四个可执行文件:redis-benchmarkredis-cliredis-serverredis-stat 这四个文件,加上一个redis.conf就构成了整个redis的最终可用包。它们的作用如下:

  • redis-server:Redis服务器的daemon启动程序
  • redis-cli:Redis命令行操作工具。当然,你也可以用telnet根据其纯文本协议来操作
  • redis-benchmark:Redis性能测试工具,测试Redis在你的系统及你的配置下的读写性能
  • redis-stat:Redis状态检测工具,可以检测Redis当前状态参数及延迟状况

现在就可以启动redis了,redis只有一个启动参数,就是他的配置文件路径。

redis-server /etc/redis.conf

注意,默认复制过去的redis.conf文件的daemonize参数为no,所以redis不会在后台运行,这时要测试,我们需要重新开一个终端。修改为yes则为后台运行redis。另外配置文件中规定了pid文件,log文件和数据文件的地址,如果有需要先修改,默认log信息定向到stdout.

下面是redis.conf的主要配置参数的意义:

  • daemonize:是否以后台daemon方式运行
  • pidfile:pid文件位置
  • port:监听的端口号
  • timeout:请求超时时间
  • loglevel:log信息级别
  • logfile:log文件位置
  • databases:开启数据库的数量
  • save * *:保存快照的频率,第一个*表示多长时间,第三个*表示执行多少次写操作。在一定时间内执行一定数量的写操作时,自动保存快照。可设置多个条件。
  • rdbcompression:是否使用压缩
  • dbfilename:数据快照文件名(只是文件名,不包括目录)
  • dir:数据快照的保存目录(这个是目录)
  • appendonly:是否开启appendonlylog,开启的话每次写操作会记一条log,这会提高数据抗风险能力,但影响效率。
  • appendfsync:appendonlylog如何同步到磁盘(三个选项,分别是每次写都强制调用fsync、每秒启用一次fsync、不调用fsync等待系统自己同步)

这时你可以打开一个终端进行测试了,配置文件中默认的监听端口是6379

2、建立用户和日志目录

第一次启动时建议为Redis建立用户和日志目录

[root@localhost redis-stable]# useradd redis
[root@localhost redis-stable]# mkdir -p /var/lib/redis 

#db文件放在这里,需要修改redis.conf

# The working directory.
#
# The DB will be written inside this directory, with the filename specified
# above using the ’dbfilename’ configuration directive.
#
# Also the Append Only File will be created inside this directory.
#
# Note that you must specify a directory here, not a file name.
dir /var/lib/redis
[root@localhost redis-stable]# mkdir -p /var/log/redis

# Specify the log file name. Also ’stdout’ can be used to force
# Redis to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
logfile /var/log/redis/redislog
[root@localhost redis-stable]# chown redis.redis /var/lib/redis 
[root@localhost redis-stable]# chown redis.redis /var/log/redis

3、配置Init脚本

Redis管理脚本基于Ubuntu 的发行版上的,Ubuntu的可以看这篇文章ubuntu安装启动redis,在Centos linux 上并不能用,下面有个脚本可以用于CentOS 。

用这个脚本管理之前,需要先配置下面的内核参数,否则Redis脚本在重启或停止redis时,将会报错,并且不能自动在停止服务前同步数据到磁盘上:

# vi /etc/sysctl.conf

vm.overcommit_memory = 1

然后应用生效:

# sysctl ?p

建立redis启动脚本:

# vim /etc/init.d/redis

#!/bin/bash 
# 
# Init file for redis 
# 
# chkconfig: - 80 12 
# description: redis daemon 
# 
# processname: redis 
# config: /etc/redis.conf 
# pidfile: /var/run/redis.pid 
source /etc/init.d/functions 
#BIN="/usr/local/bin" 
BIN="/usr/local/bin" 
CONFIG="/etc/redis.conf" 
PIDFILE="/var/run/redis.pid" 
### Read configuration 
[ -r "$SYSCONFIG" ] && source "$SYSCONFIG" 
RETVAL=0 
prog="redis-server" 
desc="Redis Server" 
start() { 
        if [ -e $PIDFILE ];then 
             echo "$desc already running...." 
             exit 1 
        fi 
        echo -n $"Starting $desc: " 
        daemon $BIN/$prog $CONFIG 
        RETVAL=$? 
        echo 
        [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog 
        return $RETVAL 
} 
stop() { 
        echo -n $"Stop $desc: " 
        killproc $prog 
        RETVAL=$? 
        echo 
        [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog $PIDFILE 
        return $RETVAL 
} 
restart() { 
        stop 
        start 
} 
case "$1" in 
  start) 
        start 
        ;; 
  stop) 
        stop 
        ;; 
  restart) 
        restart 
        ;; 
  condrestart) 
        [ -e /var/lock/subsys/$prog ] && restart 
        RETVAL=$? 
        ;; 
  status) 
        status $prog 
        RETVAL=$? 
        ;; 
   *) 
        echo $"Usage: $0 {start|stop|restart|condrestart|status}" 
        RETVAL=1 
esac 
exit $RETVAL

然后增加服务并开机自启动:

# chmod 755 /etc/init.d/redis 
# chkconfig –add redis 
# chkconfig –level 345 redis on 
# chkconfig –list redis

[root@localhost redis-stable]# service redis start
Starting Redis Server:                                     [确定]
[root@localhost redis-stable]# cat /var/log/redis/redislog
[14250] 14 Jul 22:23:15 * Server started, Redis version 2.4.15
[14250] 14 Jul 22:23:15 * The server is now ready to accept connections on port 6379
[14250] 14 Jul 22:23:15 – 0 clients connected (0 slaves), 717512 bytes in use
[14250] 14 Jul 22:23:20 – 0 clients connected (0 slaves), 717512 bytes in use
[14250] 14 Jul 22:23:25 – 0 clients connected (0 slaves), 717512 bytes in use
[14250] 14 Jul 22:23:30 – 0 clients connected (0 slaves), 717512 bytes in use
[14250] 14 Jul 22:23:35 – 0 clients connected (0 slaves), 717512 bytes in use
[root@localhost redis-stable]# 

喜欢 (0)
[🍬谢谢你请我吃糖果🍬🍬~]
分享 (0)
关于作者:
少将,关注Web全栈开发、项目管理,持续不断的学习、努力成为一个更棒的开发,做最好的自己,让世界因你不同。
发表我的评论
取消评论

表情 贴图 加粗 删除线 居中 斜体 签到

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址