• 欢迎访问少将全栈,学会感恩,乐于付出,珍惜缘份,成就彼此、推荐使用最新版火狐浏览器和Chrome浏览器访问本网站。
  • 吐槽,投稿,删稿,交个朋友,商务沟通v:ai_draw
  • 如果您觉得本站非常有看点,那么赶紧使用Ctrl+D 收藏少将全栈吧

搭建OpenWrt开发环境(包括编译过程)

嵌入式 admin 10年前 (2014-04-09) 2118次浏览 已收录 0个评论 扫描二维码

OpenWrt是一个高度模块化、高度自动化的嵌入式linux发行版,其编译和安装过程比普通的linux发行版而言,要简单太多了。如果您是新手,您那恐惧的心大可放到肚子里,呵呵。对于新手来说最麻烦的恐怕是安装开发环境需要的软件了。
最基本条件:

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1.PC一台,性能强点,性能好编译得就快。linux推荐安装ubuntu8.04中文版(或者suse)和fedora 11(对于初学者而言,最好是装在虚拟机如VM里,可省去很多麻烦。如何在VM里安装linux,您可多google或者baidu)
2.宽带一条,需要速度好点,因为有很多软件包是网络下载后安装。
3.耐心和时间。
编译环境准备(安装linux发行版和软件包):

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1.安装好ubuntu8.04中文版本或者fedora 9或者11,搞定网络连接。
以非root用户登陆,打开“应用程序?-附件?-终端”。如果您已经安装好linux, 那么此步骤请略去。
2.如果您选择ubuntu, 那么ubuntu开发环境需要的软件有sudo apt-get install gcc g++ binutils
patch bzip2 flex bison make autoconf gettext texinfo unzip sharutils
subversion libncurses5-dev ncurses-term zlib1g-dev
然后
sudo apt-get update
如您选择安装fedora11或者fedora9
Fedora 11 or 9:
# yum install autoconf binutils bison bzip2 flex gawk gcc gcc-c++ gettext make ncurses-devel patch unzip wget zlib-devel
由于fedora 安装包本来就很全面,所以需另外安装的东西较少。所以一般情况下,推荐安装fedora 11。对于初学者而言,最方便的方法是在VM上安装linux。
由于ubuntu本来就是基于suse, 所以如果您要以suse为开发环境,那么您参考ubuntu的安装步骤即可。
如果你能阅读英文,那么请参考
http://wiki.openwrt.org/doc/howto/buildroot
OpenWrt英文论坛2006年文章:Building OpenWrt Kamikaze from source
https://forum.openwrt.org/viewtopic.php?id=9180
这里有更详细权威的说明。
4.获取OpenWrt源代码和安装包,更新
1. svn checkout svn://svn.openwrt.org/openwrt/trunk(开发版本,不稳定,不建议下载)

PS:wgethttp://downloads.openwrt.org/backfire/10.03/backfire_10.03_source.tar.bz2(目前稳定版本,建议)
2.检查配置环境

必须使用非root用户进行操作,添加一个普通用户。(注意:如果使用root进行操作的话,会提示检查失败:Checking ’non-root’… failed.)

[root@localhost trunk]# adduser openwrt

[root@localhost trunk]# su openwrt

为了防止文件读写权限造成问题,需要将源码copy到openwet的根目录下进行所有操作。

[openwrt@localhost openwrt]$ cd ~

[openwrt@localhost ~]$ cp -r /usr/src/test/trunk ./

[openwrt@localhost ~]$ cd trunk/

[openwrt@localhost trunk]$ ls

BSDmakefile LICENSE README feeds.conf.default package scripts toolchain

Config.in Makefile docs include rules.mk target tools


3.下载feeds

Feeds是OpenWrt环境所需要的软件包套件。最重要的feeds有:

‘packages’一些额外的基础路由器特性软件

‘LuCI’OpenWrt默认的GUI

‘Xwrt’另一种可选的GUI界面

需要能够连接互联网。

在下载之前可以通过查看’feeds.conf.default’文件,来检查哪些文件需要包含在环境中。

开始下载,使用:

[openwrt@localhost trunk]$ ./scripts/feeds update -a

安装feeds包,只有安装之后,在后面的make menuconfig时,才可以对相关配置进行勾选。

[openwrt@localhost trunk]$ ./scripts/feeds install -a

如果更新了feeds的配置文件,需要添加新的软件包用于生成系统。只需进行重复操作:

[openwrt@localhost trunk]$ ./scripts/feeds update -a

[openwrt@localhost trunk]$ ./scripts/feeds install -a


4.进行配置

编译过程使用的交叉编译,交叉编译生成的SDK以及image等文件的类型取决于开发环境、应用硬件、以及源码版本。所以要对自己的环境进行了解,才能进
行正确的配置。我在配置过程中,就遇到了这个问题,我的硬件是brcm47xx,在第一次编译的时候,选择地是Target System
(Broadcom BCM947xx/953xx),最后生成的包无法在router上安装,版本不匹配。第二次安装时,选择了Target
System (Broadcom
BCM947xx/953xx[2.4]),安装成功,我的板子可能只支持linux2.4的内核。(设备型号是Linksys
Wrt54gs v3.0) (2011.05.01添加:其实Linksys Wrt54gs v3.0是支持Linux
2.6版本的,Target System 选择 Broadcom
BCM947xx/953xx,编译后也是可以用的,这周末由于项目需要改某个软件,每次修改代码后,都得重新编译一下固件,经过来回编译了十来次,都可
以使用。另外。内核版本升级之后,无线驱动改成了mac802.11,而非以前的wl,以为wl.o这个专门的库只在linux2.4中才用到。)

[openwrt@localhost trunk]$ make defconfig

[openwrt@localhost trunk]$ make prereq

[openwrt@localhost trunk]$ make menuconfig

通过文本对话框进行选项配置,最主要的配置项有:

Target system(目标系统类型)

Package selection(软件包选择)

Build system settings (编译系统设置)

Kernel modules (内核模块)

[*]表示:这个包裹选中编译,并安装在firmware中;

[M]表示:这个软件包选中编译,但并不安装在firmware中。

在退出Menuconfig的时,会提示是否保存配置。

在此我只对target system进行了选择;勾选了Advanced configuration option和Build the OpenWrt SDK选项。

5.编译

(1)一般情况,使用一个简单的命令:

[openwrt@localhost trunk]$ make

(2)在多核处理器系统上为提高速度,可使用(例如用3核处理器):

[openwrt@localhost trunk]$ make ?j 3

(3)在后台进行编译,使用空闲的I/O资源和CPU性能,可使用(例如使用双核处理器)

[openwrt@localhost trunk]$ onice -c 3 nice -n 20 make -j 2

(4)编译一个单独的软件包(例如在cups软件包):

[openwrt@localhost trunk]$ make package/cups/compile V=99

(5)如果特殊原因需要分析编译报错信息:

[openwrt@localhost trunk]$ make V=99 21 |tee build.log |grep -i error

说明:将编译的所有输出信息保存在build.log中,将error信息打印在屏幕上。

(6)一个复杂指令的应用

[openwrt@localhost trunk]$ ionice -c 3 nice -n 20 make -j 2 V=99
CONFIG_DEBUG_SECTION_MISMATCH=y 21 |tee build.log |egrep -i
’(warn|error)’

说明:将编译的所有输出信息保存在build.log中,将error和warning信息打印在屏幕上。编译过程使用双核CPU,占用后台资源。


6.生成镜像(Image)位置

新生成的镜像会默认放在新建的一个bin目录下。例如:/bin/brcm-2.4/packages

[openwrt@localhost trunk]$ ls bin/*

将编译好的镜像做个备份,例如备份到/目录下:

[openwrt@localhost trunk]$ cp bin /


7.清理工作

建议现在清理编译产生的文件,以免下次编译时造成冲突,(文件如果存在的话,将不会被替换),执行make clean

注意:在执行clean命令,确保已经将编译好的image进行了备份。清理工作会清楚bin目录。

[openwrt@localhost trunk]$ make clean

除了清除生成的目录,还想清除交叉编译工具(以及工具链目录)

[openwrt@localhost trunk]$ make dirclean

清除所有相关的东西,包括下载的软件包,配置文件,feed内容等:(不建议使用)

[openwrt@localhost trunk]$ make distclean

对于更新feeds后出现的错误:

ERROR:please fix package/feeds/packages/mc/Makefile 等类似的问题,需要执行这条语句进行系统的清理


更详细的信息建议您参考
http://downloads.openwrt.org/kamikaze/docs/openwrt.html
应该是当前最新最权威的文档

编译过程中需要通过官网下载很多相关的软件包,所以必须保证能够顺利连上外网。由于下载速度的限制,编译过程大概需要数小时。编译结束后,所有的产品都会
放在编译根目录下的bin/yourtarget/. 例如:我所编译的产物都放在./bin/brcm47xx/下,其中文件主要有几类:
(1). bin/.trx 文件:
这些都是在我们所选的target-system的类别之下,针对不同路由器型号、版本编译的路由器固件。这些不同路由器的型号和版本是openwrt预
先设置好的,我们不需要更改。至于.bin和.trx的区别,一种说法是,第一次刷路由器的时候,需要用.bin文件,如果需要再升级,则不能再使用.
bin文件,而需要用.trx文件。原因是,.bin是将路由器的相关配置信息和.trx封装在一起而生成的封包,也就是说是包含路由器版本信息的.
trx。在第一次刷固件的时候,我们需要提供这样的信息,而在后续升级时,则不再需要,用.trx文件即可。
(2)packages文件夹: 里面包含了我们在配置文件里设定的所有编译好的软件包。默认情况下,会有默认选择的软件包。
(3) OpenWrt-SDK.**.tar.bz2: 这个也就是我们定制编译好的OpenWRT
SDK环境。我们将用这个来进行OpenWrt软件包的开发。例如,我所编译好的SDK环境包为:/bin/brcm47xx/OpenWrt-SDK-
brcm47xx-for-Linux-x86_64-gcc-4.3.3+cs_uClibc-0.9.30.1.tar.bz2
可以从名称上看出,target system是brcm47xx,host system是Linux-x86_64,使用的编译工具以及库是4.3.3+cs_uClibc-0.9.30.1。
(4)md5sums 文件: 这个文件记录了所有我们编译好的文件的MD5值,来保证文件的完整性。因为文件的不完整,很容易将路由器变成“砖头”。
需要主要的是,编译完成后,一定要将编译好的bin目录进行备份(如果里面东西对你很重要的话),因为在下次编译之前,执行make clean 会将bin目录下的所有文件给清除掉!!
2、 更改原有packages
在编译根目录下会有一个dl的目录,这个目录其实是“download”的简写,在编译前期,需要从网络下载的数据包都会放在这个目录下,这些软件包的一
个特点就是,会自动安装在所编译的固件中,也就是我们make
menuconfig的时候,为固件配置的一些软件包。如果我们需要更改这些源码包,只需要将更改好的源码包打包成相同的名字放在这个目录下,然后开始编
译即可。编译时,会将软件包解压到build_dir目录下。
当然,你也可以自己在dl里面创建自己的软件包,然后更改相关的配置文件,让openwrt可以识别这个文件包。
由于我的项目更改的内容是底层的,需要跟固件一起安装。所以,我使用的方法就是直接更改dl目录下软件包,然后重新进行固件编译。感觉类似于Linux的内核编译。反复编过十多次,没有任何问题。


第一次编译由于要下载大量的软件包,慢慢的等吧,快则半小时,慢则2,3小时. 如果下载过慢,建议您中断编译过程,然后用迅雷去主动下载,放到./dl目录下。一个加快速度的小技巧: 本站小编已经将将一些常用的软件包打包成dl.tar,放在http://ul.to/2y8a2w, 下载后用tar xvf dl.tar(在windows下用winrar打开即可,然后你用ftp或者samba之类传到LinuxPC上),将解包出来的东东直接放到./dl目录下,相必会大大加快初次安装、编译的速度。同样在http://ul.to/fasgus上可下载linux-2.36.30.10.tar.bz2,当然您也可以用迅雷之类的工具来下。
8. 编译好的文件在当前目录的bin文件夹下。
如果是brcm-2.4
ls bin/brcm-2.4/
就可以看到很多熟悉的文件了。

9、 安装OpenWrt

找到对应的固件,进行固件升级。网上方法很多,这里不再赘述。

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

下面我们编写自己的package:

新建自己的packages
对于自己新建的package,而这个package又不需要随固件一起安装,换句话说,就是可以当做一个可选软件包的话。我们可以利用我们的SDK环境来单独编译,编译后会生成一个ipk的文件包。然后利用 opkg install xxx.ipk 来安装这个软件。
下面具体说下,如何编译一个helloword的软件包。
(1)首先,编写helloworld程序
编写helloworld.c
/****************
* Helloworld.c
* The most simplistic C program ever written.
* An epileptic monkey on crack could write this code.
*****************/
#include stdio.h
#include unistd.h
int main(void)
{
printf(“Hell! O’ world, why won’t my code compile?

“);
return 0;
}
编写Makefile文件
# build helloworld executable when user executes “make”
helloworld: helloworld.o
$(CC) $(LDFLAGS) helloworld.o -o helloworld
helloworld.o: helloworld.c
$(CC) $(CFLAGS) -c helloworld.c
# remove object files and executable when user executes “make clean”
clean:
rm *.o helloworld

在这两个文件的目录下,执行make 应该可以生成helloworld的可执行文件。执行helloworld后,能够打印出“Hell! O’
world, why won’t my code
compile?”。这一步,主要保证我们的源程序是可以正常编译的。下面我们将其移植到OpenWRT上。
(2)将OpenWrt-SDK-brcm47xx-for-Linux-x86_64-gcc-4.3.3+cs_uClibc-0.9.30.1.tar.bz2解压
tar ?xvf OpenWrt-SDK-brcm47xx-for-Linux-x86_64-gcc-4.3.3+cs_uClibc-0.9.30.1.tar.bz2
(3)进入SDK
cd OpenWrt-SDK-brcm47xx-for-Linux-x86_64-gcc-4.3.3+cs_uClibc-0.9.30.1
可以看到里面的目录结构跟我们之前source的目录结构基本相同,所需要编译的软件包,需要放置在package目录下
(4)在package目录下创建helloworld目录
cd package
mkdir helloworld
cd helloworld
(5)创建src目录,拷贝 helloworld文件
mkdir src
cp /home/wrt/test/helloworld.c src
cp /home/wrt/test/Makefile src
(6)在helloworld目录下创建Makefile文件
这个Makefile文件是给OpenWRT读的,而之前写的那个Makefile文件是针对helloworld给编译其读的。两个Makefile不在同一层目录下。
touch Makefile
vim Makefile
Makefile文件模板内容如下:
##############################################
# OpenWrt Makefile for helloworld program
#
#
# Most of the variables used here are defined in
# the include directives below. We just need to
# specify a basic description of the package,
# where to build our program, where to find
# the source files, and where to install the
# compiled program on the router.
#
# Be very careful of spacing in this file.
# Indents should be tabs, not spaces, and
# there should be no trailing whitespace in
# lines that are not commented.
#
##############################################
include $(TOPDIR)/rules.mk
# Name and release number of this package
PKG_NAME:=helloworld
PKG_RELEASE:=1

# This specifies the directory where we’re going to build the program.
# The root build directory, $(BUILD_DIR), is by default the build_mipsel
# directory in your OpenWrt SDK directory
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)

include $(INCLUDE_DIR)/package.mk

# Specify package information for this program.
# The variables defined here should be self explanatory.
# If you are running Kamikaze, delete the DESCRIPTION
# variable below and uncomment the Kamikaze define
# directive for the description below
define Package/helloworld
SECTION:=utils
CATEGORY:=Utilities
TITLE:=Helloworld — prints a snarky message
endef

# Uncomment portion below for Kamikaze and delete DESCRIPTION variable above
define Package/helloworld/description
If you can’t figure out what this program does, you’re probably
brain-dead and need immediate medical attention.
endef

# Specify what needs to be done to prepare for building the package.
# In our case, we need to copy the source files to the build directory.
# This is NOT the default. The default uses the PKG_SOURCE_URL and the
# PKG_SOURCE which is not defined here to download the source from the web.
# In order to just build a simple program that we have just written, it is
# much easier to do it this way.
define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
$(CP) ./src/* $(PKG_BUILD_DIR)/
endef

# We do not need to define Build/Configure or Build/Compile directives
# The defaults are appropriate for compiling a simple program such as this one

# Specify where and how to install the program. Since we only have one file,
# the helloworld executable, install it by copying it to the /bin directory on
# the router. The $(1) variable represents the root directory on the router running
# OpenWrt. The $(INSTALL_DIR) variable contains a command to prepare the install
# directory if it does not already exist. Likewise $(INSTALL_BIN) contains the
# command to copy the binary file from its current location (in our case the build
# directory) to the install directory.
define Package/helloworld/install
$(INSTALL_DIR) $(1)/bin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/helloworld $(1)/bin/
endef

# This line executes the necessary commands to compile our program.
# The above define directives specify all the information needed, but this
# line calls BuildPackage which in turn actually uses this information to
# build a package.
$(eval $(call BuildPackage,helloworld))

(7)返回到SDK的根目录
执行make进行编译
编译过程会在build_dir目录下完成
编译结果会放在 bin/[yourtarget]/package目录下helloworld_1_bcm47xx.ipk
(8)上传helloworld_1_bcm47xx.ipk
使用sftp软件上传helloworld_1_bcm47xx.ipk至路由器
执行 opkg install helloworld_1_bcm47xx.ipk
输入hello然后按Tab键,发现openwrt中已经有helloworld可执行命令。
执行 helloworld 查看程序的效果。
Hell! O’ world, why won’t my code compile?

喜欢 (0)
[🍬谢谢你请我吃糖果🍬🍬~]
分享 (0)
关于作者:
少将,关注Web全栈开发、项目管理,持续不断的学习、努力成为一个更棒的开发,做最好的自己,让世界因你不同。
发表我的评论
取消评论

表情 贴图 加粗 删除线 居中 斜体 签到

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址